URBANO LEDPLUS version
Professional streetlight luminaire for LED light sources.
- High efficacy to 156 lm/W
- Possible illuminance control
- Modern design
- Simple one person mounting
DownloadRequest for product info
on pillar ø60/76mm, on outriggers ø60/76mm
high pressure die-cast aluminum
Lateral Surface Wind Exposed
Power supply efficiency
Includes light source
Lifetime LED (L90)
100 000 h
Available on request
DIM 1..10V, LLOC, twilight sensor, 10kV surge protection, NEMA connector, ZHAGA connector
freeways, express roads, local roads, town roads, residential area roads, area lighting, airports, parking areas
Tilt adjustment: 5°, knife switch (for protection class I), NTC. The possibility of using one or more power supplies in the luminaire. CRI/Ra >70
the pole and boom are not part of the luminaire
tool-free access to the power supply compartment by means of clips (PLUS version only - index extension: .865), additional anti-corrosive protection (index extension: .985)
* Lower temperature range: -40°C to -20°C, depending on the type of power supply used (consultation with the LUG Technical Preparation of Production Branch is required).
Please note that the standard luminaire is not intended for use in an environment with an increased corrosivity category. The use of the luminaire for work in an environment for which additional corrosion protection is necessary requires the use of an index with the extension .985 (on request).
In order to apply the luminaire in an aggressive environment, for example with an increased concentration of sulfur, salt or other aggressive substances, a consultation with the LUG Technical Preparation of Production Branch is required.
Luminous flux tolerance +/- 10%.
Power tolerance +/- 5%.
Lighting beam, light intensity distribution and light efficiency were examined in accordance with the EN ISO 17025:2005 norm for EN13032 norm series and the LM-79 norm.
Up-to-date product info and General Warranty Terms available on our website www.luglightfactory.com
Detailed information on luminous fluxes and powers for individual indexes are indicated on the product data sheet.
The parameters in the data sheet are given for Ta=25°C.
The operating temperature ranges apply only to luminaires used in the outdoor environment.
Colour temperature tolerance +/- 5%.