Professional streetlight luminaire for LED light sources.
- High efficacy to 151 lm/W
- Winner of the Good Design 2015
- Possible illuminance control
- Modern design
- Simple one person mounting
on pillar ø60/76mm, on pillar ø60/48mm (only for luminaires with a degree of regulation 0° ... +15°) - modification .834, on outriggers ø60/76mm, on outriggers ø60/48mm (only for luminaires with a degree of regulation 0° ... +15°) - modification .834
high pressure die-cast aluminum
Lateral Surface Wind Exposed
Power supply efficiency
Includes light source
Lifetime LED (L90)
100 000 h
Available on request
DALI, DIM 1..10V, LLOC, twilight sensor, 10kV surge protection, NTC, NEMA connector, ZHAGA connector, Colour temperature - 2200K; 2700K
freeways, express roads, local roads, town roads, residential area roads, area lighting, airports, parking areas
Tilt adjustment: 5°, knife switch (for protection class I), access to the driver chamber without the use of tools. The possibility of using one or more power supplies in the luminaire. CRI/Ra >70
the pole and boom are not part of the luminaire
additional anti-corrosive protection (index extension: .985), luminaire with holder for mounting on a ø60/48mm pillar (only for luminaires with a degree of regulation 0° ... +15°) - index extension: .834
* Lower temperature range: -40°C to -20°C, depending on the type of power supply used (consultation with the LUG Technical Preparation of Production Branch is required).
Please note that the standard luminaire is not intended for use in an environment with an increased corrosivity category. The use of the luminaire for work in an environment for which additional corrosion protection is necessary requires the use of an index with the extension .985 (on request).
In order to apply the luminaire in an aggressive environment, for example with an increased concentration of sulfur, salt or other aggressive substances, a consultation with the LUG Technical Preparation of Production Branch is required.
Luminous flux tolerance +/- 10%.
Power tolerance +/- 5%.
Lighting beam, light intensity distribution and light efficiency were examined in accordance with the EN ISO 17025:2005 norm for EN13032 norm series and the LM-79 norm.
Up-to-date product info and General Warranty Terms available on our website www.luglightfactory.com
Detailed information on luminous fluxes and powers for individual indexes are indicated on the product data sheet.
The parameters in the data sheet are given for Ta=25°C.
The operating temperature ranges apply only to luminaires used in the outdoor environment.
Colour temperature tolerance +/- 5%.