Professional streetlight luminaire for LED light sources.
- High efficacy to 157 lm/W
- Possible illuminance control
- Modern design
on pillar ø60/40mm, on pillar ø76mm - modification .829, on outriggers ø60/40mm, on outriggers ø76mm - modification .829
high pressure die-cast aluminum
Lateral Surface Wind Exposed
Power supply efficiency
Includes light source
Lifetime LED (L90)
100 000 h
Available on request
DALI, DIM 1..10V, LLOC, twilight sensor, knife switch, 10kV surge protection, NTC, NEMA connector, ZHAGA connector, Colour temperature - 2200K; 2700K, extension of the warranty to 10 years
express roads, local roads, town roads, residential area roads, pedestrian crossings, area lighting, avenues, promenade, cycle paths, public spaces, parking areas
Tilt adjustment: -15° to +15° (every 5°), CRI/Ra >70
the pole and boom are not part of the luminaire
additional anti-corrosive protection (index extension: .985), access to the driver chamber without the use of tools (index extension: .825), luminaire with holder for mounting on a ø76mm pillar (index extension: .829), luminaire with motion detector (index extension: .870 / .871 / .872) - available as standard with ø60mm adjustable handle with adjustment range of -110° to +55°/-20° to +145°, ø60mm adjustable bracket with an adjustment range of -20° to +145° (index extension: .867)
* Lower temperature range: -40°C to -20°C, depending on the type of power supply used (consultation with the LUG Technical Preparation of Production Branch is required).
Please note that the standard luminaire is not intended for use in an environment with an increased corrosivity category. The use of the luminaire for work in an environment for which additional corrosion protection is necessary requires the use of an index with the extension .985 (on request).
In order to apply the luminaire in an aggressive environment, for example with an increased concentration of sulfur, salt or other aggressive substances, a consultation with the LUG Technical Preparation of Production Branch is required.
Luminous flux tolerance +/- 10%; power tolerance +/- 5%; colour temperature tolerance +/- 5%.
Lighting beam, light intensity distribution and light efficiency were examined in accordance with the EN ISO 17025:2005 norm for EN13032 norm series and the LM-79 norm.
Up-to-date product info and General Warranty Terms available on our website www.luglightfactory.com
Detailed information on luminous fluxes and powers for individual indexes are indicated on the product data sheet.
The parameters in the data sheet are given for Ta=25°C.
The operating temperature ranges apply only to luminaires used in the outdoor environment.