THIS WEBSITE USES COOKIES
This site uses cookies in order to deliver services in accordance with Privacy Policy. You can use settings within your browser to control the cookies that are set on your computer – conditions of access or storage of cookies.
Do not show this again
Download image
URBINO LED
Professional streetlight luminaire for LED light sources.



High efficacy to 157 lm/W
Possible illuminance control
Modern design
Reliability

Application

area lighting, avenues, cycle paths, express roads, local roads, parking areas, pedestrian crossings, promenade, public spaces, residential area roads, town roads

Available on request

10kV surge protection, CLO, Colour temperature - 2200K; 2700K, DALI, DIM 1..10V, NEMA connector, NTC, ZHAGA connector, extension of the warranty to 10 years, knife switch, twilight sensor

Luminous flux range

3000 - 19400 [lm]

Variable color temperature

3000 - 5700 [K]

Mechanical data

Mounting
on pillar ø60/40mm, on pillar ø76mm - modification .829, on outriggers ø60/40mm, on outriggers ø76mm - modification .829
Body colour
gray
Operating temperature range
* max +35, * max +40, * max +50
RAL
7035
Body
high pressure die-cast aluminum
Lateral Surface Wind Exposed
0.039 m²
Type
O13, O14, O15, O16 optics, O2, O3, O4, O5, O6P, O6L, O7, O8, O26 optics, O2, O3, O4, O5, O6P, O6L, O7, O8, O26, O59, O60, O61, O84, O85, O88, O89 optics, O33, O34, O35, O36, O37P, O37L, O38, O39, O40 optics, O90, O91, O92 optics, OP2 optics

Electrical data

Power supply efficiency
≤93%
Power
220-240V 50/60Hz
Includes light source
yes
Luminaire power [W]
23 - 157
Output current [mA]
350, 450, 550, 700
Type of equipment
DALI/ED, ED
Maximum number of luminaires in the circuit with a 10A fuse (B)
4 - 23
Maximum number of luminaires in the circuit with a 16A fuse (B)
7 - 36
Maximum number of luminaires in the circuit with a 25A fuse (B)
12 - 57

Optical data

Way of lighting
direct
Type of optic
O13 - for express roads, O14 - for local roads, O15 - for town roads, O16 - for residential area roads, O2 - for express roads, O26 - for wet surfaces, O3 - for local roads, O33 - for express roads, O34 - for local roads, O35 - for town roads, O36 - for residential area roads, O37L - for pedestrian crossings, left side traffic, O37P - for pedestrian crossings, right side traffic, O38 - for area lighting, O39 - for town and local roads, O4 - for town roads, O40 - for wet surfaces, O5 - for residential area roads, O59 - for local roads, O60 - for town roads, O61 - for residential area roads, O6L - for pedestrian crossings, left side traffic, O6P - for pedestrian crossings, right side traffic, O7 - for area lighting, O8 - for town and local roads, O84 - for road lighting, O85 - for road lighting, O88 - for road lighting, O89 - for road lighting, O90 - for road lighting, O91 - for road lighting, O92 - for road lighting, OP2
Diffuser
tempered glass
Colour temperature [K]
3000, 4000, 5700
CRI/Ra
>70
MacAdam's steps
5
ULOR / DLOR
0% / 100%
Lumen luminaire [lm]
3000 - 19400
Efficacy [lm/W]
109 - 157
Photobiological risk group
RG1
Number of LEDs
12, 16, 24, 32, 36, 48, 72, 96

General data

Additional equipment
additional anti-corrosive protection (index extension: .985), access to the driver chamber without the use of tools (index extension: .825), luminaire with holder for mounting on a ø76mm pillar (index extension: .829), luminaire with motion detector (index extension: .870 / .871 / .872) - available as standard with ø60mm adjustable handle with adjustment range of -110° to +55°/-20° to +145°, ø60mm adjustable bracket with an adjustment range of -110° to +55°/-20° to +145° (index extension: .867)
Additional information
Tilt adjustment: -15° to +15° (every 5°), CRI/Ra >70
Other remarks
the pole and boom are not part of the luminaire
Lifetime LED L90
100 000 h
Warranty
5 years

Dimensions

Dimensions [mm] LxWxH Pallet quantity Quantity in package Net weight [kg]
550x250x100 50 1 6.8
550x250x100 50 1 7
X

Available variants

Code
Colour temperature [K]
3000
4000
5700
Lumen luminaire [lm]
Luminaire power [W]
Efficacy [lm/W]
Type of equipment
DALI/ED
ED
Way of mounting
on outriggers ø60/40mm
on outriggers ø76mm - modification .829
on pillar ø60/40mm
on pillar ø76mm - modification .829
Type of optic
O13 - for express roads
O14 - for local roads
O15 - for town roads
O16 - for residential area roads
O2 - for express roads
O26 - for wet surfaces
O3 - for local roads
O33 - for express roads
O34 - for local roads
O35 - for town roads
O36 - for residential area roads
O37L - for pedestrian crossings, left side traffic
O37P - for pedestrian crossings, right side traffic
O38 - for area lighting
O39 - for town and local roads
O4 - for town roads
O40 - for wet surfaces
O5 - for residential area roads
O59 - for local roads
O60 - for town roads
O61 - for residential area roads
O6L - for pedestrian crossings, left side traffic
O6P - for pedestrian crossings, right side traffic
O7 - for area lighting
O8 - for town and local roads
O84 - for road lighting
O85 - for road lighting
O88 - for road lighting
O89 - for road lighting
O90 - for road lighting
O91 - for road lighting
O92 - for road lighting
OP2
Protection Class
I
II
Clear Filters
Compare Code Protection Class Type of optic Type of equipment Luminaire power [W] Lumen luminaire [lm] Efficacy [lm/W] Colour temperature [K] Operating temperature range
130222.5L011.011 I O2 - for express roads ED 27 3300 122 4000 * max +50
130222.5L011.021 I O3 - for local roads ED 27 3250 120 4000 * max +50
130222.5L011.031 I O4 - for town roads ED 27 3250 120 4000 * max +50
130222.5L011.041 I O5 - for residential area roads ED 27 3300 122 4000 * max +50
130222.5L011.051 I O6P - for pedestrian crossings, right side traffic ED 27 3350 124 4000 * max +50
130222.5L011.061 I O7 - for area lighting ED 27 3300 122 4000 * max +50
130222.5L011.081 I O8 - for town and local roads ED 27 3250 120 4000 * max +50
130222.5L011.091 I O6L - for pedestrian crossings, left side traffic ED 27 3350 124 4000 * max +50
130222.5L011.101 I O26 - for wet surfaces ED 27 3150 117 4000 * max +50
130222.5L011.351 I O59 - for local roads ED 29 3300 114 4000 * max +50
Compare selected
Shown 10 / 751
Show all
* Lower temperature range: -40°C to -20°C, depending on the type of power supply used (consultation with the LUG Technical Preparation of Production Branch is required).
Please note that the standard luminaire is not intended for use in an environment with an increased corrosivity category. The use of the luminaire for work in an environment for which additional corrosion protection is necessary requires the use of an index with the extension .985 (on request).
In order to apply the luminaire in an aggressive environment, for example with an increased concentration of sulfur, salt or other aggressive substances, a consultation with the LUG Technical Preparation of Production Branch is required.
Luminous flux tolerance +/- 10%.
Power tolerance +/- 5%.
Lighting beam, light intensity distribution and light efficiency were examined in accordance with the EN ISO 17025:2005 norm for EN13032 norm series and the LM-79 norm.
Up-to-date product info and General Warranty Terms available on our website www.luglightfactory.com
Detailed information on luminous fluxes and powers for individual indexes are indicated on the product data sheet.
The parameters in the data sheet are given for Ta=25°C.
The operating temperature ranges apply only to luminaires used in the outdoor environment.
Colour temperature tolerance +/- 5%.
Download Materials
Select and download the materials you are interested in
To download
Product sheet
Declarations and certificates
Light beam curves
3D/2D models
Mounting instruction
Download selected
CUSTOMISATION - OUR SETTING YOUR WAY
A luminaire, according to the Journal of Standards, is a device that is used to distribute, filter and convert the light output from one or more light-emitting sources, which is located in the mains
custom
Customisation
Bespoke - Let's develop a project together
A luminaire, according to the Journal of Standards, is a device that is used to distribute, filter and convert the light output from one or more light-emitting sources, which is located in the mains
bespoke
Bespoke
Custom Products
URBINO LED 100000 h
Professional streetlight luminaire for LED light sources. Lifetime (L80B10) 100000 h.
URBINO LED 10kV DALI
Professional streetlight luminaire for LED light sources. Luminaire equipped with DALI driver, RAL7016 color, 10kV and NTC protection on the LED module.
URBINO LED 10kV KNIFE SWITCH
Professional streetlight luminaire for LED light sources. The subject of the modification is the fitting of the luminaire with a power cord of three different lengths, a knife switch, 10KV surge protection andaccess to the driver chamber without the use of tools.
URBINO LED 120-277V
Professional streetlight luminaire for LED light sources. Power supply 120 - 277V.
URBINO LED 120-277V 5700K
Professional streetlight luminaire for LED light sources. Power supply 120-277V 50 / 60Hz. Color temperature 5700K.
URBINO LED 2700K 10kV/10kA
Professional streetlight luminaire for LED light sources. Surge protection 10kV/10kA w. Ind. with indicator LED, NTC - LED temp. protection, Knife switch, handle ø76mm, Tool-less access, CLO, 2700K
URBINO LED 3000K
Professional streetlight luminaire for LED light sources. Color temperature 3000K.
URBINO LED ALUMINUM ARM
Aluminum arm for URBINO LED luminaire, equipped with a mLED module with green accent light. New.
URBINO LED ARONSISI
Professional streetlight luminaire for LED light sources. The subject of the modification is the use of ARONSISI Y370HH1 paint.
URBINO LED CLS INDEX
Professional streetlight luminaire for LED light sources. Modification concerns changing the index number and name of the luminaire on the CLS-URBINO LED.
URBINO LED DALI/ED
Professional streetlight luminaire for LED light sources.
URBINO LED DIM
Professional streetlight luminaire for LED light sources. Luminaire modification to DIM version.
URBINO LED FIXED STREAM REDUCED POWER
Professional streetlight luminaire for LED light sources. The subject of the modification is adding the possibility of programming the power reduction of the luminaire to 70% from 00:00 am to 4:00 am and maintenance a fixed luminous flux in time (WLCQ).
URBINO LED HIGH EFFICACY
Professional streetlight luminaire for LED light sources. The subject of modification is adapting the luminaire to achieve high efficacy and using XPG-3 diodes.
URBINO LED IMCU
Professional streetlight luminaire for LED light sources. Application of the IMCU driver.
URBINO LED LLOC
Professional streetlight luminaire for LED light sources. The subject of the modification is the fitting of the luminaire with the LLOC power supply programmed for a 5-step power reduction.
URBINO LED MODIFIED
Professional streetlight luminaire for LED light sources. Part of the luminaire under the PCB with LEDs without painting, additional strain relief of the power cord.
URBINO LED MODIFIED FLUX
Professional streetlight luminaire for LED light sources. Increasing the stream of the luminaire while preserving the power - change the LEDs.
URBINO LED MODIFIED FLUX
Professional streetlight luminaire for LED light sources. Luminaire with modified flux.
URBINO LED PROG 9100lm
Professional streetlight luminaire for LED light sources. Modification of the luminaire with a knife switch, a special information sticker and XPG-3 diodes.
URBINO LED REDUCED POWER
Professional streetlight luminaire for LED light sources. The subject of the modification is a luminaire with reduced power.
URBINO LED SOLAR SYSTEM
Professional streetlight luminaire for LED light sources. Implementation of the luminaire for the solar system.
URBINO LED STRADELLA
Professional streetlight luminaire for LED light sources. Luminaire with Stradella optics.
URBINO LED XPG3 10kV LLOC
Professional streetlight luminaire for LED light sources. The subject of the modification is the fitting of the luminaire with XPG-3 diodes, 10kV surge protection and LLOC.
Accessories
150173.00906
150170.00818
Wall bracket ø60mm
150175.01107
150172.01097
Side louvers for URBINO LED luminaires
150175.01106
150172.01096
Rear-side louvers for URBINO LED luminaires